beyerdynamic M 160 - D00125 | Rycote Global
Brand: beyerdynamic
Model: M 160 - D00125 | Rycote Global
SKU
D00125
Specifications
-
Minimum Diameter23.0 mm
-
Maximum Diameter38.0 mm
-
Length156.0 mm
-
Weight156.0 mm
Compatible Products
Windshield Solutions
-
RYC086003 Modular Windshield WS 2 KitThe Modular Windshield WS 2 Kit is suitable for small diaphragm condenser microphones from 121mm up to 160mm in length with a 19-25mm diameter and a 3-Pin XLR connection.
-
RYC010602 Windshield 2The perfect solution for improving exterior wind attenuation for your microphone. This standard modular windshield, with a body length of 210mm, is designed to provide up to 25dB of wind protection. Made from a flexible grey plastic netting tube with a special screening material attached, this windshield is both lightweight and durable. The twist and turn locking end caps ensure easy, rattle-free and secure fastening. The unique slide-on/slide-off system allows for easy removal of the microphone and suspension, making it convenient for on-the-go recording. The outside diameter of the Mono Windshields is 100mm, while the stereo windshields are 145mm, with the length determined by the microphone used.
-
RYC011001 20mm BBG WindshieldMade to offer the wind attenuation properties of a full sized windshield in a much smaller package, the BBG Windshields are designed to slip onto the body of the microphone. This allows the microphone to be hand-held or shock-mounted with a Lyre suspension.
Perfect for short microphones, the BBG Windshield are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are widely used for microphones with bulbous ends and ORTF microphone pairs, where the maximum head diameter is 80 mm.
The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Windshield is mounted directly on the microphone, by a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule.
The Windshield consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield. For additional wind protection a furry Windjammer cover is available.
Shock Mounts & Suspension
-
RYC041118 InVision INV 7HG MkIIIPart of the larger InVision range of noise-reducing microphone shock-mounts, Rycote's InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote's latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics. -
RYC041107 InVIsion INV-7Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote's InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote's latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.