sennheiser ME 67 K6 - D00099 | Rycote Global
Brand: sennheiser
Model: ME 67 K6 - D00099 | Rycote Global
SKU
D00099
Specifications
-
Maximum Diameter22.5 mm
-
Length343.0 mm
-
Weight100.0 mm
Compatible Products
Windshield Solutions
-
RYC011001 20mm BBG WindshieldMade to offer the wind attenuation properties of a full sized windshield in a much smaller package, the BBG Windshields are designed to slip onto the body of the microphone. This allows the microphone to be hand-held or shock-mounted with a Lyre suspension.
Perfect for short microphones, the BBG Windshield are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are widely used for microphones with bulbous ends and ORTF microphone pairs, where the maximum head diameter is 80 mm.
The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Windshield is mounted directly on the microphone, by a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule.
The Windshield consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield. For additional wind protection a furry Windjammer cover is available. -
RYC010604 Windshield 4The perfect solution for improving exterior wind attenuation for your microphone. This standard modular windshield, with a body length of 330mm, is designed to provide up to 25dB of wind protection. Made from a flexible grey plastic netting tube with a special screening material attached, this windshield is both lightweight and durable. The twist and turn locking end caps ensure easy, rattle-free and secure fastening. The unique slide-on/slide-off system allows for easy removal of the microphone and suspension, making it convenient for on-the-go recording. The outside diameter of the Mono Windshields is 100mm, while the stereo windshields are 145mm, with the length determined by the microphone used.
-
RYC010703 Windshield Extension 3The Rycote Windshield Extension 2 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 7 (500mm). The Windshield Extension is a lightweight, durable basket made from flexible grey plastic netting with a screening material attached
-
RYC021507 Windjammer WJ7The windjammer is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a windjammer fitted over a windshield up to 50dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.
-
RYC086007 Modular Windshield WS 7 KitThe Rycote Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer. Basket system suitable for shotgun microphones from 401mm to 450mm in length, and 19-34mm diameter with a 3-pin XLR connector. Compatible microphones include Sony C74 and Sennheiser ME 67 K6.