MKH 60

Brand: sennheiser
SKU D00137
An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output. It has switchable, pre-attenuation, bass roll-off and treble lift. It has exceptionally low inherent noise. The low-impedance capsule design makes it virtually immune to high humidity and condensation.

Compatible Products

  1. Rycote 18cm Super-Softie (24/25) RYC033204
    RYC033204 18cm Super-Softie (24/25)
    The Super-Softie® with our material 3D-Tex™ combines superb wind noise reduction with excellent acoustic transparency.

    Excellent noise reduction and weather durability

    The Super-Softie® retains the excellent wind noise reduction of a conventional cavity windshield but allies it to a novel aerodynamic shape and surface structure, and to a material - 3D-Tex™ - which combines excellent acoustic transparency with superb attenuation of wind noise. It has no rigid internal structure, so causes virtually no polar pattern distortion and is extremely robust in challenging environments such as news-gathering.

    If it becomes rain-soaked it can be squeezed out and shaken dry very quickly; if it becomes coated with dust it can be rinsed quickly without affecting its performance.

    The shape & structure of the Super Softie® allow it to reduce wind noise at extreme LF and infrasonic frequencies - where the greatest wind energy lies - more efficiently than previous designs.
  2. Rycote Cyclone Windshield Kit, Large RYC089101
    RYC089101 Cyclone Windshield Kit, Large
    The Cyclone Windshield Kit, Large is suitable for shotgun microphones from 250mm up to 280mm in length and 19-25mm diameter with a 3-pin XLR connector such as the Sennheiser MKH 416, MKH 60 and Schoeps CMIT 5U.

    The Cyclone features a durable, lightweight design, category leading wind and shock isolation performance, with the same overall mass yet lighter in weight than modular windshield designs. 

    Suspension
    The Cyclone introduces a unique “multi-suspension” design that provides complete isolation against handling noise and cable-borne noises, and windshield basket self-noise. In addition to the outstanding shock protection provided by the patented Rycote Lyre suspension webs, shock performance is further enhanced by the new Rycote Floating-Basket Suspension with Lyre® Technology (patent pending). This basket suspension provides a unique isolation barrier between the windshield basket and suspension that inhibits noise and vibration induced by the windshield itself from being mechanically transmitted to the primary suspension.

    Windshield
    The two-piece Z-Locking design magnetically affixes the basket around the microphone for instant and secure attachment to or detachment from the suspension. Increased transparency is achieved due to the cone-like shape, which vastly reduces reflective parallel surfaces and “room effect”. With the same overall mass, the unique, design shifts the overall bulk to the basket front for superior wind-noise reduction exceeding modular-style windshield / windjammer combined performance. In addition to the shape and structure of the Cyclone, 3D-Tex® covers the windshield exterior. This durable material combines excellent acoustic transparency with superb attenuation of wind noise.

    Optional Accessories
    Cyclone Windjammer (Large), Extension soft-grip Handle.
  3. Rycote Modular Windshield WS 4 Kit  RYC086001
    RYC086001 Modular Windshield WS 4 Kit
    The Modular Windshield 4 Kit is suitable for shotgun microphones from 211mm up to 280mm in length and 19-34mm diameter with a 3-pin XLR connector such as the Sennheiser MKH 416, MKH 60 and Schoeps CMIT 5.
  4. Rycote InVision INV 7HG MkIII RYC041118
    RYC041118 InVision INV 7HG MkIII
    Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote's InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.

    The InVision Broadcast mounts feature Rycote's latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.