Connbox CB2 (XLR-3F Detachable)

Product Code: 016902

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB2 is suitable for long shotgun microphones with 3-pin XLR. The XLR-3F tail is detachable from the Connbox.


Main Benefits:

  • Isolates and minimises handling and cable-borne noise
  • Greatly improves audio quality of recordings
  • A ready-to-use solution to connection problems

Sharing Options

An effective and ready-to-use solution to connection problems, the Connbox will enable professional sound recorders to achieve clean, high quality audio recordings.

Acting as a transition connector and anchor point for the microphone tail, the lengths of cable are set to work perfectly with the microphone fitted in the windshield, without touching the internal surface of the basket. The soft cable then greatly reduces the transmission path of cable-borne noise, thus further reducing cable rumble.

The Connbox is made of the highest quality components, using Gold 3-pin Neutrik X-series XLR connectors, and an ultra soft Mogami star-quad cable.
INPUT
Input Connector: XLR -3F
Input Connbox Connector: TA-3M Binder
Input Cable Outside Diameter: 2.5mm
Input Cable Exposed Length: 180mm
Input Cable Band Colour: Yellow

OUTPUT
Output Connector: XLR – 3M
Output Connbox Connector: Hardwired
Output Cable Outside Diameter: 4.8mm
Output Cable Exposed Length: 500mm
Output Cable Band Colour: Yellow


Net Weight: 80g



Sennheiser MKH 20An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully-floating balanced output, switched pre-attenu...
Sennheiser MKH 70An RF condenser microphone using a symmetrical capsule. It has a transformerless, fully floating balanced output and switchable pre-a...
Sennheiser MKH 816A transformerless RF condenser microphone with a very narrow response pattern. Below 500Hz the pattern is hypercardioid, becoming mor...
Sony C76Supercardioid shotgun condenser microphone with a two position low-cut switch. It is a similar RF condenser design to the C-74 but mo...
1 x Connbox CB2 (XLR-3F Detachable)
Product Code: 016902
Suitable for long shotgun microphones with 3-pin XLR.





Connboxes (Mono & Stereo)

Connboxes (Mono & Stereo) from Rycote on Vimeo.


FAQ Categories



Product Code(s)

Connbox CB2 (XLR-3F Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB2 is suitable for long shotgun microphones with 3-pin XLR. The XLR-3F tail is detachable from the Connbox.

Product Code: 016902


Similar Products