Table Stand

Product Code: 041128


Main Benefits:

  • Non-slip base
  • features a 3/8-inch screw thread to mount microphones and suspensions

Sharing Options

The Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free, and may be used in broadcast studios or for location recording where a desk or other flat surface is available.

The Rycote Table Stand is 70mm round, has a non-slip base, and features a 3/8-inch screw thread into which Rycote microphone suspensions, audio recorder suspensions or clips fitted with small-diaphragm or shotgun microphones up to 250mm long may be attached. It is sold separately, or together with Rycote InVision INV-7 HG MkIII Lyre mount if required.
Width: 13 cm
Height: 5 cm
Length: 24 cm
Gross Weight: 0.1426 KG
Pack Width: 24 cm
Pack Length: 13 cm
Pack Height: 5 cm






DPA 4021The 4021 uses the same type of cartridge as the famous 4011, but is preamplified using a built-in, ultra-small, thick-film mounted FE...
Neumann KM 100 seriesThe variable condenser miniature microphone system consists of several active microphone capsules with different directional characte...
RODE NT-6A remote capsule design microphone for use where unobtrusive placement is required. The compact capsule is a 13mm design that can be ...
Schoeps CCM 41The CCM 41 supercardioid has the greatest directional effect of any first-order pressure gradient transducer. The response 90° of...
Schoeps CCM Series (Hard wired)For more information on this specific microphone, go to Schoeps website at http://www.schoeps.de/en/home
Schoeps CCM Series (Lemo)The CCM represents the logical next step in the miniaturization of classic condenser microphone technology without any compromise in ...
1 x Table Stand
Product Code: 041128
The Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free





Studio & Live Sound.pdf
Studio and Live Sound Solutions

Studio & Live Sound_08_14.pdf
Studio & Live Sound (update 08_14)

FAQ Categories



Product Code(s)

Table Stand

The Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free

Product Code: 041128