SKU RYC033352

18cm Classic-Softie Kit (19/22)

SKU RYC033352
  • Provides a fast, flexible solution for ENG on camera microphones
  • Constructed of an acoustic foam base
  • Gives protection up to 25dB wind noise reduction
Description
The Softie Mount, used with the Softie Windshield provides a fast, flexible and cost effective solution for ENG use and forms a robust and practical windshield (70mm in diameter) which can be effectively used without the mount in handhels operation mode.

The Softie Windshield & Shockmount system comprises of the following:
Softie Windshield The Softie Windshield is a slip on open cell foam, with an integral fitted fur cover. The Softie will reduce wind noise and protect your microphone, and is the standard world-wide in TV. Available in a large range of sizes to fit most popular microphones.

Softie Mount The mount is a simple but effective. The mount comes in 3 sizes, dependant on the diameter of your microphone. The attachment below the mount is then determined by the intended use of the mount, for example Pistol grip handle, boom pole adaptor or the Multi Mount for use on a camcorders hotshoe.

The main component of the Softie mount is a one piece rubber (actual material: EPDM) diaphragm shockmount. This unit is extremely robust, and has been tested in all environment conditions to ensure it performs.

The mounts are 58mm diameter x 56mm long, and support short to medium length shotgun microphones. Please use the ''Quick Product Finder'' to see what size you need for your mic. The Softie mount will only fit shotgun microphones, which are cylindrical in shape (the same diameter though their whole length). We can not mount microphones that taper, with the Softie mount.

The longest Softie Windshields have an internal bore of 32cm (12-1/2'') - Example:AKG CK68 or Audio Technica AT815b. These are the longest microphones we would recomend using a Softie Mount for, simply because the mount is flexible & cannot support longer mics. For longer mics, we would only recomend a Full Windshield System, and a Modular suspension.
Specifications
  • Internal Length
    180 mm
  • Max Wind-noise Attenuation
    25 dB
  • To Fit Mic Diameter
    19 - 22 mm
  • Total Length
    205 mm
  • Windjammer Fur Colour
    Grey
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

Shotgun Mic

  1. sennheiser MKH 416
    A short shotgun interference tube microphone for film, radio and television, especially for outside broadcast applications. The low-impedance capsule design makes it virtually immune to high humidity and condensation. Transformerless and fully floating balanced output.
  2. beyerdynamic MC 736
    For more information on this specific microphone, visit the brand website.
  3. sennheiser ME 66 K6
    Short shotgun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications, and for picking up quiet signals in noisy or acoustically live environments, as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch resistant finish. Length shown is for head only.
  4. beyerdynamic MC 716
    For more information on this specific microphone, visit the brand website.
  5. sony ECM 678
    The ECM-678 is a short shotgun, electret condenser-type microphone for field production and broadcast studio applications. It is also intended for use on professional camcorders such as the HDV Series, DVCAM Series, and XDCAM Series. A built-in low-cut filter switch helps to reduce unwanted pop and wind noise encountered in the field.
  6. sony ECM 670
    A supercardioid short rifle electret condenser microphone. It has a low-cut filter to reduce ambient noise. It is suitable for mounting on Sony cameras and camcorders.
  7. beyerdynamic MCE 87vs
    Short shotgun microphone for use with semi-professional and domestic camcorder systems. MCE87 has internal battery powering and similar electrical specification to MCE86.
  8. beyerdynamic MC 726
    For more information on this specific microphone, visit the brand website.
  9. beyerdynamic MCE 86 N (C) S
    The MCE 86 II replaces the earlier MCE 86/87 as a short rifle microphone for camera and general use. The construction and integral filter minimise sensitivity to wind and zoom motor noise. It uses an electronic output and can feed long cable runs. The basic version is phantom powered; the suffix S is phantom or battery, and can drive unbalanced XLR or 3.5mm jack inputs. The S version weighs 120g and is 310mm long.
  10. beyerdynamic MC 836
    Short shotgun microphone with low frequency roll-off switch.
  11. sennheiser ME 80 K3U
    A short-shotgun capsule for use with various K-series power modules - measurements given with the K3U. [The K3U (XLR) or K3N (Tuchel) powering module had balanced output, the K1 unbalanced, and the K30AV was a transformerless o/p with multipin connector and non-standard powering.]

FAQ

No Questions
Go back
Show more