sony ECM 672 - D00086 | Rycote Global

Made to offer the wind attenuation properties of a full sized windshield in a much smaller package, the BBG Windshields are designed to slip onto the body of the microphone. This allows the microphone to be hand-held or shock-mounted with a Lyre suspension.

Perfect for short microphones, the BBG Windshield are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are widely used for microphones with bulbous ends and ORTF microphone pairs, where the maximum head diameter is 80 mm.

The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Windshield is mounted directly on the microphone, by a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule.

The Windshield consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield. For additional wind protection a furry Windjammer cover is available.

The Super-Softie® with our material 3D-Tex™ combines superb wind noise reduction with excellent acoustic transparency.

Excellent noise reduction and weather durability

The Super-Softie® retains the excellent wind noise reduction of a conventional cavity windshield but allies it to a novel aerodynamic shape and surface structure, and to a material - 3D-Tex™ - which combines excellent acoustic transparency with superb attenuation of wind noise. It has no rigid internal structure, so causes virtually no polar pattern distortion and is extremely robust in challenging environments such as news-gathering.

If it becomes rain-soaked it can be squeezed out and shaken dry very quickly; if it becomes coated with dust it can be rinsed quickly without affecting its performance.

The shape & structure of the Super Softie® allow it to reduce wind noise at extreme LF and infrasonic frequencies - where the greatest wind energy lies - more efficiently than previous designs.

The Rycote Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.

This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer. Basket system suitable for shotgun microphones 281mm to 350mm in length / 19-34mm in diameter, with a 3-Pin XLR connector. Compatible mics include Sennheiser ME 66 K6 and AKG CK 98 SE300 B.

The Rycote Windshield Extension 1 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 5 (400mm). The Windshield Extension is a lightweight, durable basket made from flexible grey plastic netting with a screening material attached

The perfect solution for protecting your shotgun microphone from light wind and pop noise. This discreet, slip-on foam windshield is designed to fit shotgun microphones with slots no further than 5cm from the front of the mic.Made of durable, high quality open-cell acoustic foam, offering up to 20 dB wind noise attenuation while minimizing high frequency loss. This makes it an essential accessory for outdoor recording, ensuring that your audio remains clear and crisp even in windy conditions.

The perfect solution for improving exterior wind attenuation for your microphone. This standard modular windshield, with a body length of 330mm, is designed to provide up to 25dB of wind protection. Made from a flexible grey plastic netting tube with a special screening material attached, this windshield is both lightweight and durable. The twist and turn locking end caps ensure easy, rattle-free and secure fastening. The unique slide-on/slide-off system allows for easy removal of the microphone and suspension, making it convenient for on-the-go recording. The outside diameter of the Mono Windshields is 100mm, while the stereo windshields are 145mm, with the length determined by the microphone used.

The windjammer is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a windjammer fitted over a windshield up to 50dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.