neumann KM100F - D00105 | Rycote Global
Brand: neumann
Model: KM100F - D00105 | Rycote Global
SKU
D00105
Specifications
-
Maximum Diameter22.0 mm
-
Length158.0 mm
Compatible Products
Windshield Solutions
-
RYC011001 20mm BBG WindshieldMade to offer the wind attenuation properties of a full sized windshield in a much smaller package, the BBG Windshields are designed to slip onto the body of the microphone. This allows the microphone to be hand-held or shock-mounted with a Lyre suspension.
Perfect for short microphones, the BBG Windshield are suitable for low-profile boom applications as well as for use in hand-held operations and interviews. They are widely used for microphones with bulbous ends and ORTF microphone pairs, where the maximum head diameter is 80 mm.
The windshield is constructed of the same material as the full size modular windshields, but rather than clipping to a microphone suspension, the Windshield is mounted directly on the microphone, by a grommet gripping the microphone body. The microphone is pushed through the grommet, to completely enclose the microphone capsule.
The Windshield consists of two halves, which can be separated, to fit microphones with a ball-head or tapered body from inside the windshield. For additional wind protection a furry Windjammer cover is available. -
RYC022501 Hi Wind Cover 1The Hi Wind Cover is designed to fit the Modular Windshield Kit to offer up to 35dB in wind noise reduction. It is manufactured from a durable black fleece material and is easy to fit in the field by simply sliding it over the Windshield basket, secured in place with Velcro pads.
-
RYC010601 Windshield 1The perfect solution for improving exterior wind attenuation for your microphone. This standard modular windshield, with a body length of 170mm, is designed to provide up to 25dB of wind protection. Made from a flexible grey plastic netting tube with a special screening material attached, this windshield is both lightweight and durable. The twist and turn locking end caps ensure easy, rattle-free and secure fastening. The unique slide-on/slide-off system allows for easy removal of the microphone and suspension, making it convenient for on-the-go recording. The outside diameter of the Mono Windshields is 100mm, while the stereo windshields are 145mm, with the length determined by the microphone used.
-
RYC021501 Windjammer WJ1The windjammer is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise. When using a windjammer fitted over a windshield up to 50dB of wind-noise attenuation can be achieved, producing excellent standard audio recordings.
-
RYC086004 Modular Windshield WS 1 KitRycote 086004 full windshield kit 1 - Includes small modular suspension + windshield 1 + windjammer 1 rycote_086004 / RYC086004. The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Modular Suspension
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
Windshield
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
The Windjammer introduced.
Shock Mounts & Suspension
-
RYC041107 InVIsion INV-7Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote's InVision Broadcast, are designed for discreet, low-profile on-camera use in broadcast studio environments where windshielding is not required.
The InVision Broadcast mounts feature Rycote's latest Lyre suspension systems to offer broadcast professionals the cleanest possible sound, free from unwanted cable or stand-borne noise. They may be used with microphones mounted on desks, stands or boom poles, or suspended mics.