Suitable for mic lengths 121mm - 160mm
Product Code: 086003
Slip-on Windshield with 3D-Tex material and open-cell foam suitable for microphones with slots no further than 5cm from the front of the mic and a diameter of 24-25mm.
Product Code: 033206
Slip-on fur and open-cell foam windshield kit suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic and a diameter of 24-25mm.
Product Code: 033313
Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic.
Product Code: 104407
Suitable for microphones with a 25mm shank diameter
Product Code: 011003
Suitable for use with Shotgun Mics 19 -25mm diameter such as Sennheiser MKH 416 and Schoeps CMIT 5.
Product Code: 041107
Ideal for front-heavy microphones, or shotgun microphones used with a Softie or BBG windshield.
Product Code: 041118
Suitable for mono microphones with 3-pin XLR.
Product Code: 016901
Universal Lyre, 72 shore, with Black rigid part & Grey Soft-grip is suitable for microphones of 19/25 mm diameter and is used on Small & Medium Suspensions
Product Code: 042210
Slip-on fur and open-cell foam windshield suitable for shotgun microphones, with slots no further than 5cm from the front of the mic and a diameter of 24-25mm.
Product: 033013
Product: 055202
Suitable for mic lengths 121-160mm
Product: 010602
Suitable for MS or ORTF Stereo combos
Product: 010904
Suitable for use with the Windshield 2
Product: 021502
Windjammer suitable for Windshield AE
Product: 021901
Suitable for the Windshield WS 2 Kit
Product: 022502
Suitable for all mono BBG Windshields
Product: 021801
Suitable for small diaphragm condensers in a WS2
Product: 040142
Suitable for cameras with a hot shoe
Product: 042901
Suitable for cameras with a 1/4" female thread
Product: 042902
Suitable for shotgun microphones from 19-25 mm in diameter
Product: 037306
Product: 037324
InVision 7HG MKIII & Table Stand
Product: 041127
Product: 041118
Vibration-resistant, low-noise suspension system designed to mount paired microphones for stereo recording.
Product: 041125
A four-sided square mic flag, suitable for microphones with 19 to 38 mm diameters.
Product: 107301
A three-sided triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Product: 107302
Product: 107307
Product: 107308
Product: 107318
Suitable for long shotgun microphones with 3-pin XLR.
Product: 016902
Suitable for most M/S stereo pairs with two 3-pin XLRs.
Product: 016924
Suitable for Schoeps CMIT-5u + CCM M/S stereo pair.
Product: 016908
An ultra-soft XLR to XLR (3-pin) microphone 40cm (4.8mm diameter) cable for use with Softie & INV-7 HG MkIII shock mounts
Product: 017018
45cm XLR3F/XLR3M Cable (OD 3.0mm)
Product: 017013
Universal back to back clips for piggy backing round and slab sided microphones between 19 and 25mm diameter.
Product: 048488
Suitable for Windshield Kit 4 and 5 and Super-Shield Kit Medium and Large
Product: 214101