SKU RYC107301

Single Square Black Mic Flag

SKU RYC107301
  • Fits A Wide Range Of Microphones
  • Lightweight But Tough
  • Black
Description
Rycote's Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber 'vanes' secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote's Mic Flags provide a large printable area for sponsors' logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

If you want your branding seen on screen, use Rycote’s Mic Flags!
Specifications
  • Body Length
    0.094 mm
  • To Fit Mic Diameter
    For mics, ø19.0 mm (ø 3/4") to ø32.0 mm (ø 1-1/4") - all vanes fitted
  • Height
    67 cm
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

  1. beyerdynamic M 58
    Designed for ENG location work, with an extra long handle and a Nextel non-reflective finish.
  2. shure SM 58
    Unidirectional dynamic vocal microphone designed for use in sound reinforcement and studio recording. The SM58S variation comes with an on/off switch.
  3. beyerdynamic MCE 58
    High output level microphone for location recording, allowing direct connection to portable DAT and MiniDisc recorders. The XLR is wired for both balanced or unbalanced connection.
  4. electrovoice 635 N/D
    Neodymium magnet version of the 635 'hammer'.
  5. audiotechnica AT 8004
    Ideal for interviews, sports-casting and as the 'mono' mic when used in conjunction with a stereo microphone, the AT804 has a rugged die-cast case with hardened steel grille, which stands up to field use. Its omni pattern provides natural reproduction of surrounding ambience, and it plugs directly into an XLRF-type surface or cable connector. Also named AT8004. The AT804L(aka AT8004L) is similar but with a longer body and a more limited frequency response.
  6. sennheiser MD 46
    Designed for audio journalists and field reporters, the Sennheiser MD 46 offers a host of advantages. Its extended frequency response provides clarity that exceeds any comparable mic in its class, and its dimensions and weight ratio lend a completely comfortable feel. Add the fact that rugged enough to stand the strain of ENG/EFP, and you have a dynamic winner.
  7. sennheiser SKM with Evolution or Neumann KK capsules
    The SKM and Evolution series handheld microphones and capsules have all been created in the best tradition of German engineering and are the result of the dedication of their engineers, of countless tests, and of the most meticulous manufacturing processes.

  8. electrovoice RE 50
    A well-known omni microphone for broadcast use. The RE50 is exceptionally well shock-isolated and very robust.

FAQ

No Questions
Go back
Show more