SKU RYC045002

InVision USM Studio Kit

SKU RYC045002
  • Fits any large-diaphragm recording mic from18-68mm in diameter
  • USM offers up to 12dB better isolation against vibrations
  • Pop Filter provides up to 20dB pops and thumps attenuation
Description
The InVision Studio Kit is a complete suspension and pop filter system, which combines the Universal Studio Mount (USM) with a new Universal Pop Filter to make a complete vocal microphone suspension and pop filter system that will accommodate virtually any microphone. The Pop Filter is designed to lock tightly on the USM's outer support ring, where it can be left while mics are quickly and easily swapped in the USM.

Rycote’s Studio Kit is fast and easy to use, and has also proved harder-wearing, more vibration-resistant and better at protecting your mic from vocal pops and thumps without high-frequency loss, than any traditional elasticated microphone suspensions. If you record vocals, you owe it to yourself to try one. Go for the Universal solution, and let the Studio Kit rock your vox!
Specifications
  • Weight
    0.2 kg
  • To Fit Mic Diameter
    Suitable for Large Diaphragm recordning microphones
  • Total Length
    300 mm
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

Large Studio Mic

  1. røde NT1-A
    An improved version of the original NT1. It retains the large capsule (25mm) with its gold-sputtered diaphragm along with the internal shock-mounting but now uses state-of-the-art surface mount electronics to provide an ultra-low noise level through its transformerless circuitry. The design is rugged and finished with a heavy-duty nickel finish.
  2. shure KSM32
    Side-address cardioid condenser microphone for studio recording and live sound. A large diaphragm Class-A transformerless design. Max SPL increases to 139dB for 2.5k* load
  3. audiotechnica AT 4050
    Superior performance for studio recording and live sound applications is provided by the AT4050's remarkable combination of warm, transparent sound and super-high SPL capability. It features three switchable polar patterns (omni, cardioid, and figure-of-8), a large-diaphragm design for extended frequency response, and symmetrical direct-coupled electronics for excellent transient response and low distortion. Switchable 80Hz hi-pass filter and 10dB pad.
  4. neumann U 87 Ai
    The U 87 is probably the best known and most widely used Neumann studio microphone. It is equipped with a large dual diaphragm capsule offering three directional patterns: omnidirectional, cardioid and figure-of-8. These are selectable with a switch below the head-grille. A 10dB attenuation switch is located on the rear. This enables the microphone to handle sound pressure levels up to 127dB without distortion. In addition, the low-frequency response can be reduced to compensate for the proximity effect.
  5. audiotechnica AT 4047/SV
    Designed for professional recording and critical applications in broadcast and live sound, the AT4047/SV has a transformer-coupled output and specially-tuned element, which provide sonic characteristics reminiscent of early FET studio microphone designs. It offers exceptionally low self-noise, wide dynamic range and high SPL capability, and has gold-plated, specially-contoured and aged, dual-diaphragms.Switchable 80Hz hi-pass filter and 10dB pad.
  6. audiotechnica AT 3060
    A large-diaphragm tube design that does not need a dedicated power supply - it operates from 48V phantom power. The cardioid back-electret condenser element provides high sensitivity and smooth reproduction with low noise levels. The tube is hand-selected and shock-mounted, and the precision-machined, nickel-plated brass acoustic element baffle provides enhanced element stability. A large coupling transformer provides superior low-frequency linearity.
  7. sennheiser MK4
    The MK 4 is a large-diaphragm true condenser microphone for professional studio recordings. Featuring fine resolution and outstanding sound quality, the MK 4 is easy to handle and excellent value for money, making it an ideal choice for professional project studios and home recordists. It features a 1 inch true condenser capsule based on the acoustics of the e 965 high-end vocal mic, optimised for recording. The MK 4 is made in Germany, its transducer being manufactured in the same clean room as all high-end Sennheiser condenser capsules.

FAQ

No Questions
Go back
Show more