SKU RYC104403

30/55 Reporter Mic Foam (Single)

SKU RYC104403
  • Up to 10dB wind/pop noise attenuation, min high-frequency loss
  • Excellent resistance to moisture and UV light
  • This windshield offers up to 20 dB wind noise attenuation
  • Discreet slip-on windshield
  • Made from durable, high quality open-cell acoustic foam
Description
Rycote 104403 30/55 Reporter Mic Foam for Reporter Mics of 30 mm diameter with slots no further than 55 mm from the front of the mic rycote_104403 / RYC104403. Rycote® Mic Foams are discreet, slip-on foam windshields, designed to protect the microphone head against light wind and ‘pop’ (plosive) noise. Made of durable, high quality open cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum. Engineered exclusively for Rycote, this high-quality foam also provides excellent resistance against the damaging effects of moisture and UV light.

Reporter Mic Foams:
Reporter Mic Foams are discreet, slip-on foam windshields, designed to protect the microphone head against light wind & ‘pop’ (plosive) noise. As they keep high frequency loss to a minimum, they are also an excellent choice for ‘live’ music applications.
Warranty

Warranty Rycote

The Rycote European Warranty offers 24-month coverage for Rycote products purchased within the European Union, Iceland, Norway, Switzerland, and Turkey.

MANUFACTURER’S LIMITED WARRANTY
Rycote Microphone Windshields Ltd (“Rycote”) warrants to purchasers of Rycote manufactured products (“Products”) within the European Union, Iceland, Norway, Switzerland and Turkey (“Purchasers” or a “Purchaser” as the context may require) that during the warranty period (as defined below), Rycote or a Rycote authorised distributor will, in a commercially reasonable time, remedy defects in materials, design and workmanship in Products free of charge by repairing or, should Rycote in its discretion deem it necessary, replacing the Product in accordance with this Warranty (unless otherwise required by law). This Warranty is only valid and enforceable in the country where the Purchaser has purchased the Product provided that Rycote has intended the Product for sale in that country. However, if the Purchaser purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and Rycote originally intended the Product for sale in one of those countries, this Warranty is valid and enforceable in all of those above listed countries.

WARRANTY PERIOD
The warranty period starts on the date of the Product’s original purchase by the first end-user Purchaser and expires twenty four months after that date (hereinafter the “Warranty Period”). The Warranty Period will not be extended or renewed or otherwise affected due to subsequent resale, Rycote authorised repair or replacement of the Product.

HOW TO GET WARRANTY SERVICE
If a Purchaser wishes to make a claim under this Warranty, the Product or the affected part (if it is not the entire Product) should be returned to a Rycote authorised distributor. Contact Rycote on sales@rycote.com for further details on how to make a claim. Information concerning Rycote distributors can be found on the Rycote website. Any claim under this Warranty is subject to the Purchaser notifying Rycote or a Rycote authorised distributor of the alleged defect within a reasonable time of it having come to the attention of the Purchaser and in any event no later than expiry of the Warranty Period. When making a claim under this Warranty, the Purchaser will be required to provide: a) the Product (or the affected part) and b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase & the Product type.

WHAT IS NOT COVERED?
This Warranty does not cover a) normal wear and tear, b) defects caused by rough handling (including, without limitation, defects caused by sharp items, by bending, compressing or dropping, etc.), or c) defects or damage caused by misuse of the Product, including use that is contrary to the instructions provided by Rycote (e.g. as set out in the Product’s user guide) and/or e) other acts beyond the reasonable control of Rycote. This Warranty does not cover defects or alleged defects caused by the fact that the Product was used with otherwise than for its intended use. This Warranty is not enforceable if the Product has been modified or repaired by anyone other than a Rycote authorised distributor or if it is repaired using unauthorised spare parts (to be determined in the sole discretion of Rycote). This Warranty is not enforceable if the Product has been exposed to moisture, to dampness or to extreme thermal or environmental conditions or to rapid changes in such conditions; to corrosion, to spillage of food or liquid or to influence from chemical products.

OTHER IMPORTANT NOTICES
If the Product is found not to be covered by the terms and conditions of this Warranty, Rycote and its authorised distributors reserve the right to charge a handling fee. When repairing or replacing the Product, Rycote may use products or parts that are new, equivalent to new or re-conditioned.

LIMITATION OF RYCOTE’S LIABILITY
This Warranty replaces all other Rycote warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s), Rycote does not assume any liability for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, Rycote’s liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of Rycote or in case of death or personal injury resulting from Rycote’s negligence.

Device Compatibility

  1. shure VP 64A
    Low impedance dynamic microphone with high energy neodymium magnet, designed for handheld use in audio and video production, and in news gathering operations.
    VP64AL is identical except for longer shaft (244mm).
  2. shure SM 63
    Elegant yet rugged, the high-output SM63 series of dynamic omnidirectional microphones are designed for professional applications where performance and appearance are critical. The three models differ only in length and color. The SM63 is designed for handheld use on stage and in broadcast, recording, and TV studios. The SM63L and SM63LB are ideal for remote interviews and other situations where longer microphones are desirable.

    The smooth, wide frequency response of the SM63 is tailored for optimum speech intelligibility, and includes a controlled low-frequency rolloff for reduced pick-up of stand and wind noise. A built-in humbucking coil makes the microphones virtually immune to strong hum fields, such as those produced by studio lighting.
  3. shure VP 64AL
    Low impedance dynamic microphone with high energy neodymium magnet, designed for handheld use in audio and video production, and in news gathering operations.

    VP64AL is identical except for longer shaft (244mm).

FAQ

No Questions
Go back
Show more